Audix - M1250BW-HC

Artnr: IDS0047685
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

Audix M1250BW-HC

Miniature Hypercardioid Condenser Microphone with RFI Immunity - White

M1250BW-HC is a mini condenser microphone by Audix production. This microphone has a white color and type hypercardioid polar pattern. With the integration of preamp and detachable cable thorough, M1250BW have a very good immunity for RF interference caused by mobile phone or any GSM device. AUDIX M1250BW which was equipped with a cardioids condenser capsule and the transducer is most appropriately used as a microphone overhead, choirs, vocals group, acoustic instruments, ambient recording space, areas of the symphony, presentations, and on cymbals/percussion.

Audix M1250B series models are also available with hypercardioid polar pattern, supercardioid, omni-directional or highly suitable for use in various applications live, studio, or broadcast. Audix M1250BW can be purchased at the vincent maestro. The most recommended online shop for lighting equipment and audio professional in Surabaya, Indonesia. All other information about the features and specifications M1250BW can be obtained at the following information:

Features:

White color, small, lightweight, low profile
Miniaturized integrated preamp circuitry
No external power adapter needed
12mm gold vapor diaphragm
Immune to RF interference
Extremely low noise, high SPL handling
Available with a cardioid, hypercardioid, omni or supercardioid capsule

Spesifications:

Polar Pattern: Hypercardioid
Transducer Type: Condenser
Frequency Response: 50Hz-19kHz
Optional: Hypercardioid, Omni, Supercardioid
Output Impedance: 150 ohms
Sensitivity: 10 mV/Pa @ 1k
Signal/Noise Ratio (A-weighted): 73 dB
Equivalent Noise Level (A-weighted): 21 dB
Maximum SPL @ .5% THD: 140 dB
Dynamic Range: 119 dB
Power Requirements: 18-52 V
Connector: 3 pin mini-XLRM
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Housing/Finish: Machined brass/powder coat
Weight: 0.7 oz
Length: 2.1"