Pioneer DJ - XPRS1182S [2 pcs left]

Artnr: IDS0119284
Tarneaeg: 2-7 tööpäeva.

Teave:

The XPRS2 Series couples the versatility and mobility of the original XPRS Series with elevated sound-performance and audio intelligibility to deliver a high-caliber speaker system for mobile DJs, live sound, houses of worship, rental and fixed installations.

KEY FEATURES

Powerful Class D Amplification

The XPRS2 Series employs Class D Amplification with high output wattage for a powerful and premiere audio experience for performers and listeners alike. The XPRS102 and XPRS122 full-range speakers feature Class D 2000 W amplification, while the XPRS1152S and XPRS1182S subwoofers offer Class D 4000 W amplification.

High Quality, Robust Build

Pioneer DJ’s all-new XPRS2 Series features a sleek all-black, protective pollywood cabinet for performance in harsh outdoor and indoor environments. The series models all come with a durable handle to support system portability and handling during setup and take down. The XPRS2 Series also features rubber feet to create separation and shock absorption between surfaces.

Three DSP Modes

Both of the XPRS2 subwoofers contain three different DSP preset modes—Boost, Extended LF, and Normal—to suit different listening environments.

Accurate Audio Performance / Frequency Response

The XPRS1182S relies on an 18” ferrite woofer with a 3” voice coil with long excursion to produce low frequencies with paramount accuracy.

Offers a 40 Hz – 120 Hz frequency response and 130 dB maximum SPL; the subwoofers pack in the performance of a permanent install subwoofer with the compact mobility required by today’s mobile artists, performers and venues.

Specifications

Main Features
Type
18 inch active subwoofer
Amplifier Output2
Class D
4000W peak
What's in the box
XPRS1182S x 1 (not sold as a pair)
Powerd cord
Quick start guide
Important Safety Precautions
Specifications
Supported voltages
110 V to 240 V (50 Hz/60 Hz)
Power consumption
800 W
Frequency Range
40 – 120 Hz
Width
661 mm
Height
535 mm
Depth
536.5 mm
Weight
32.3 kg
System characteristic
DSP modes
EQ Mode Select (3 DSP Preset Modes(Switch))
LPF
POLARITY
DSP presets modes
BOOST
EXTENDED LF
NORMAL
Maximum Sound Pressure
130 dB
Terminals
Inputs
Left Mono (Combo)
Right (Combo)
Outputs
Left Mono (XLR)
Right (XLR)
Speaker
Driver
18” ferrite LF cone driver
Finish
Black paint, Rubber feet
Handle
2 (on both sides)
Pole socket
35 mm socket
Enclosure
Plywood (TSCA)
Protection
Amplifier Protection
Thermal limiting
Digital compressor
Driver Protection
Short circuit protection
Power unit Protection
Primary AC mains overcurrent protection
Primary AC mains overvoltage protection