dj service
shopping_cart
Allen & Heath Xone:92A Limited Edition

Allen & Heath Xone:92A Limited Edition Allen & Heath Xone:92A Limited Edition Allen & Heath Xone:92A Limited Edition Allen & Heath Xone:92A Limited Edition Allen & Heath Xone:92A Limited Edition Allen & Heath Xone:92A Limited Edition

Allen & Heath - Xone:92A Limited Edition

Artnr: IDS0126821
Tarneaeg: 2-10 tööpäeva.

Allen & Heath
2174.00 EUR/tk

Igakuine kuumakse alates 71.16 euro

Teave:

Classic Styling. Modern Features.
The Limited Edition pays homage to the original early run of Xone:92 mixers with a retro-styled silver top panel recalling the much-loved colourway from the early 2000s.

The Xone design team painstakingly matched the Limited Edition’s colour against one of the earliest Xone:92 units, resulting in a perfect colour match for the top plate.

The legend has been refocussed to provide increased legibility of key controls, and recessed Filter and XFade switches further improve the mixing ergonomics over the original design.

The crossfader has been updated to the industry-favourite mini innoFADER Pro®, tuned to match the curve of the original 92 fader, providing a smooth mixing experience.

The 92 Preamp. Fine Tuned.
The Xone:92 Limited Edition’s phono preamps have been fine-tuned to get the best out of your decks and vinyl.

Hardware Specifications
Type: Analogue
Channels: 6 + 2
EQ 4-Band: CH 1 - 4 ¦ MIC/RTN 1 ¦ MIC/RTN 2
BOOTH: STEREO/MONO ¦ MUTE ¦ Level
Phono Inputs: 4 x RCA: CH 1 - 4
Earth Ground Terminals x 1
Stereo Line Inputs: 4 x RCA [CH 1 - 4], 2 x 1/4" TRS [RTN 1 / RTN 2] Mono/Stereo
Mic Input: 2 x XLR [MIC 1 / MIC 2]

MIX 1 Output: 1 x XLR [Balanced]
MIX 2 Output: 1 x 1/4" TRS [Unbalanced]
BOOTH Output: 1 x 1/4" TRS [Unbalanced]
RECORD Output: 1 x RCA [Unbalanced]

Stereo Send/Return: I/O 2 x 1/4" TRS: AUX1 ¦ AUX2 [Mono/Stereo], 2 x 1/4" TRS: RTN 1 ¦ RTN 2 [Mono/Stereo]
Aux Sends: 2 x CH 1 - 4 ¦ MIC/RTN 1 ¦ MIC/RTN 2 [selectable Pre/Post]

Filters: 2 x Stereo analogue Voltage Controlled Filters HPF / BPF / LPF Response Select ¦ ON/OFF [soft switched]
Adjustable FREQ / RES / LFO
Assignable CH 1- 4 [soft switched]

Channel 1 - 4 Faders 60mm linear Voltage Controlled Amplifier
Channel 1 - 4 Fader Curve Switched ¦ 3-way Global
Cross Fader mini innoFADER Pro standard ¦ 45mm linear VCA ¦ User replaceable
Cross Fader Curve Rotary ¦ Progressive transition to Fast-cut

MIDI Assignable Yes: MIDI CC ¦ MIDI Note ON/OFF
MIDI Out: 1 x 5-pin DIN

Power Supply Internal switch mode power unit [SMPS] with auto sensing mains input
AC Mains 100 to 240V AC ¦ 50/60Hz
Consumption 30W max
Rear panel mounted ON/OFF switch
Mains Adaptor 3 pin IEC socket with cable clamp. Molded AC plug [supplied]

Technical Specifications
Output Levels; Nom (0VU) / Max MIX 1 + 4dBu / + 25dBu
MIX 2: + 6dBu / + 21dBu
BOOTH: + 8dBu / + 21dBu
RECORD: - 10dBu / + 12dBu

Internal headroom Channels: + 22dB
Frequency response: LINE IN to MST out +1/-0.5dB from 20Hz to 30kHz
Distortion Typically: 0.01% @ 1kHz 0dBu (THD+Noise 22Hz to 22kHz)
Crosstalk: < -90dB inter-channel @ 1kHz +10dBu
Residual Noise: (22Hz - 22kHz)
MASTER 1 - 85dBu
MASTER 2: - 85dBu
BOOTH: - 85dBu

Mix Noise: (22Hz - 22kHz) Master 1 - 81dBu
Master: 2 - 81dBu
Booth: - 81dBu
Record RCA: - 90dBu

Mic Gain: +30dB, EIN = -126dB (@ 40dB gain with 150R source)
RIAA Gain: +35dB @ 1kHz (14mV RMS= 0VU @ 1kHz)
Channel Meters 9 LED - 20dBu to + 10dBu
Master Meters 9 LED - 20dBu to + 10dBu

Channel EQ MIC/RTN
HI 12kHz +/-15dB
HM 2.7kHz +/-15dB
LM 270Hz +/-15dB
LO 60Hz +/-15dB

Channel EQ 1-4 HI 2.4kHz + 6/-∞dB
HM 1.8kHz + 6/-30dB
LM 320Hz + 6/-30dB
LO 220Hz + 6/-∞dB

Channel faders 1-4 60mm VCA control individually replaceable. < -82dB shutoff @1kHz +10dBu
Cross-fader 45mm innoFADER VCA control. Plug in replacement - user replaceable (A&H part#: AI11470 )

Filters: Dual, stereo, analogue Voltage Controlled Filters.

Panels: Steel

PSU Internal. Switch-mode

Mains Input: 3 pin IEC socket Power Lead: country dependant.

AC mains: 100V to 240V AC @ 47/63Hz`

Consumption: 30W max Fuse rating 100-240V AC T500mA L [0dBu = 0.775 Volts rms / +4dBu = 1.23V rms / 0dBV = 1 Volt rms / -10dBV = 316mV rms]

Taking the original 92 preamp circuit as a starting point, the Xone team dedicated countless hours to testing numerous modifications. Throughout this process, we conducted continuous listening tests to pinpoint the optimal RIAA curve for the Limited Edition, settling on a curve tailored specifically for electronic music.

The addition of Line/Phono source matching ensures a smoother mixing experience for DJs who combine vinyl and digital playback in their sets.

For The Collectors.
With no more than 920 mixers available worldwide, the Xone:92 Limited Edition is the ultimate collector's item for those with a love of vinyl and analogue.

The rear panel of each Xone:92 Limited Edition features a specially designed serial number plate, etched and filled with a unique and sequential serial number.

Also included in the box is a matching engraved “dog tag” key fob, machined with the unique serial unique number of the mixer.

Worx of Art.It’s not just the mixer that is a work of art. 
Inside the box is an exclusive fine art print from The Worxlab. 12” square - naturally - and printed on premium archival-quality paper using professional pigment ink, hand signed and numbered with the serial number of the mixer by artist and founder of DJWORX and SKRATCHWORX, Mark Settle. 

“Given that the original Xone:92 was released the same year I released Skratchworx to the world, working together on this project feels like the perfect collaboration.” 
Mark Settle, The Worxlab.

A hand-signed and numbered Certificate of Authenticity from The Worxlab is included with the giclée.

For The Collectors.
With no more than 920 mixers available worldwide, the Xone:92 Limited Edition is the ultimate collector's item for those with a love of vinyl and analogue.

The rear panel of each Xone:92 Limited Edition features a specially designed serial number plate, etched and filled with a unique and sequential serial number.

Also included in the box is a matching engraved “dog tag” key fob, machined with the unique serial unique number of the mixer.