Yamaha - DHR15

Artnr: IDS0125324
Tarneaeg: 6-11 tööpäeva.

Teave:

The DHR15 is a 2-way bi-amp powered loudspeaker equipped with a 15-inch woofer and a 1.4-inch HF driver, perfect for use as a main speaker. Combining a 1000W amplifier and high-performance DSP with the same plywood construction found on Yamaha’s high-end DZR Series, the DHR15 offers best-in-class sound quality and durability.

Featuring a plywood cabinet that delivers a clear sound with minimal vibration
Plywood enclosure with a polyurea coating for a robust, scratch resistant surface
Compact size despite the 15-inch LF driver that provides excellent low frequency response
Dual-angle pole sockets offer both 0° or a -7° down tilt
Rigging points for use with eye bolts
Proprietary FIR-X™ tuning, provides FIR filtering and corrective EQ, minimizing phase distortion

2-way, Bi-amped Powered Speaker, Bass-reflex
Frequency range (-10dB) 44 Hz - 20 kHz
Coverage area H90 x V60
Crossover 1.8 kHz: FIR-X tuning™ (linear phase FIR filter)
Maximum Output Level (Measured peak, IEC noise@1m) 131 dB SPL
Components LF Diameter: 15" cone, Voice Coil: 2.5", Magnet: Ferrite
HF Diaphragm: 1.4", Type: 1" throat compression driver, Magnet: Ferrite
Amplifier class Class-D
Power rating Dynamic 1,000 W (LF: 800 W, HF: 200 W) *1
Continuous 465 W (LF: 400 W, HF: 65 W)
Cooling Fan cooling, 4 speeds
Power consumption 74 W (1/8power), 18 W (Idle)
Power requirements 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz
A/D D/A Converters 24 bit 48 kHz Sampling
Processors HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF
I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Cabinet material Plywood
Finish Durable Polyurea Painting, Black
Handle Side x2
Pole socket Φ35 mm x2 (Bottom, 0° or -7°)
Rigging Top x 2, Rear x 1 (Fit for M10 x 30 - 50 mm Eyebolts)
Floor Monitor Angle -
Dimensions W 432 mm
H 692 mm
D 405 mm
Net weight 24.0 kg