DAP Audio - PSS-106 Battery Speaker with Wireless Receiver

Artnr: IDS0116448
Tarneaeg: 6-14 tööpäeva.

Teave:

100 W full-range battery speaker with Bluetooth and MP3 function
Lightweight Class-D amplifier
Can be used as floor monitor, tilt back, or PA system
5 hours charging time and 5 hour battery life @ maximum output
Built-in 2-channel amplifier with Bluetooth, USB, 3.5/6.3 mm jack and XLR input
The DAP PSS-106 Battery Speaker with Wireless Receiver is a versatile mobile audio solution with a nice sounding 6.5" woofer and 1" tweeter. The design allows it to be used as a tilt-back floor monitor or as a small PA loudspeaker with a 35-mm pole mount. Two switches on the back and side automatically detect its application and adjust the frequency curve appropriately.

Equipped with a lightweight 3-channel class-D amplifier, the PSS-106 can receive two microphones and an audio source, like USB, Bluetooth device or a device with (mini)jack output. It also has a built-in microphone receiver and comes with a dedicated wireless handheld microphone.

The battery lasts up to 5 hours at full output and is fully rechargeable in 5 hours. This makes it a very convenient and trustable mobile solution for a wide variety of applications.

Please note that a more economic PSS-106 speaker is also available without standard built-in microphone receiver and wireless handheld microphone.

Specifications

Outputs
Main Outputs
1
Main Output Connector
TRS balanced 6.3 mm
Low Driver Power
90 W
High Driver Power
10 W
RMS Output Power Amplifier
100 W
Peak Output Power Amplifier
160 W
Inputs
Mono Inputs
2
Mono Input Connector
3-pin XLR, TS unbalanced 6.3 mm
Mono Balanced Input Maximum Level
1 dBu
Auxiliary Inputs
1
Auxiliary Input Connector
TRS balanced 3.5 mm
Auxiliary Unbalanced Input Maximum Level
10 dBv
Playback
Supported Audio Files
MP3
Media Input/Output
USB-A, SD Card
Audio Specifications
Amp Technology
Class D
Speaker System
Battery Operated
Maximum SPL at 1 m
110 dB
Frequency Response Minimum
70 Hz
Frequency Response Maximum
20000 Hz
Frequency Response (-6dB) Minimum
70 Hz
Frequency Response (-6dB) Maximum
20000 Hz
Crossover Frequency High
1900 Hz
Woofer Diameter
6.5 "
Woofer Voice Coil
1.5 "
Compression Driver Diameter
1 "
Compression Driver Magnet Type
Neodymium
Microphone Type
Dynamic
Dynamic Range
100 dB
Sound Editing
Parametric Microphone Equalizer
2 Bands
Microphone Input Equalizer Range
10 dB
Microphone Input Fixed Frequencies
100, 10.000 Hz Hz
Parametric Channel Equalizer
2 Bands
Input Channel Equalizer Range
10 dB
Channel Input Fixed Frequencies
100, 10.000 Hz Hz
Built-in FX
Yes
FX Types
Reverb
Wireless Specifications
Wireless Microphone Frequency Start
863 MHz
Wireless Microphone Frequency End
865 MHz
RF Power
10 mW
RF Bandwidth
2 MHz
Wireless Stability
0.005%
Bluetooth Audio Profile
A2DP
Battery
Battery Type
AA, Lithium ion
Battery Voltage
25.9 V
Capacity
2.2 Ah
Runtime @Full
5 h
Runtime Average
8 h
Charging Time
5 h
Control and Programming
Display
LED
Electrical Specifications and Connections
Power Supply
220V-240 VAC 50 Hz
Power Consumption
100 W
Fuse
1.6 A
Power Connector in
IEC
Mechanical Specifications
Height (mm)
323 mm
Width (mm)
240 mm
Length (mm)
265 mm
Height Transmitter (mm)
48 mm
Width Transmitter (mm)
48 mm
Length Transmitter (mm)
245 mm
Material
ABS
Weight
5.9 kg
Weight Transmitter
0.2 kg
IP Rating
IP20 (indoor use only)
Colour
Black
Finish
Painted
Product Properties
VOX
Yes
Pole Mount
35 mm
Cooling
Convection
Electronic Protection
Clip limiter, Overheat, Overload, Thermal
LED Indicators
Battery status, BT Pairing, Charging, Power, Protect, Signal
Speaker Grill Material
Steel
Speaker Handles Positions
Top
Castors
None
Thermal Specifications
Maximum Ambient Temperature
40 °C
Minimum Ambient Temperature
5 °C
Included Items
Included Cables
IEC cable
Included Accessories
Microphone Wireless