ART - TransY

Artnr: IDS0082155
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

The TransY compressor/limiter features a discrete, low noise transistor audio path using a Field Effect Transistor for level control producing incredible detail. The unique feed forward detector topology and the servo FET drive circuitry provide a new level of flexibility and tone. The unit can be set to control audio levels from smooth and unobtrusive to full-blown deep sustain.

From the Active balanced input to the transformer-coupled output, the TransY abounds with easily adjustable reliable, repeatable functions due to the attention to detail in the design. The TransY adapts to a multitude of applications with its’ +4/-10 level switch. A wide range of adjustments are available through the front panel controls always producing a musical result. Even the universal power supply adapts to line voltages allowing you to tour the world or connect to portable power sources without interruption.

Apply the TransY as your secret weapon from playing out live to recording and mastering. The TransY can handle whatever you throw at it producing a professional result. Master your unique sound with the TransY.
Key Features
Low noise, low THD discrete transistor audio path for incredibly detailed sound
 Unique servo controlled FET gain reduction circuit
 Rotary Slope switches provide reliable, repeatable results
 De-esser reduces sibilance when compressing vocals
 Detector loop with separate input and output jacks allows contoured compression
 10-segment peak sensitive Level meter can monitor either the Input or output
 High resolution LED Gain Reduction
 Custom Output Transformer reduces ground noise and maintains level for balance/unbalanced connections
 Hardwire bypass simplifies troubleshooting, even when power is lost
 +4/-10 I/O switch optimizes the S/N and operation with a wide range of equipment
 Link for stereo mode makes all CH1 controls the Master
 Universal External supply with locking connector reduces noise and provides uninterrupted operation over a wide range of line voltages
 Rugged, reliable steel chassis shields the preamp from external noise
 3-year parts and labor warranty
Specifications
Equivalent Input Noise
-90dBu/ -102dBu “C” wtd. (+4/-10)
Input Impedance
Balanced Input: 33kΩ
Detector Input: 2M Ω
Output Impedance
Balanced, +4/-10: 110 Ω
Detector Output: 270 Ω
Maximum Input Level
Balanced, +4/-10: +21dBu / +9dBu
Detector Input: +20dBu
Maximum Output Level
Balanced, +4/-10: +21dBu / +9 dBu
Detector: +20dBu
Frequency Response
15-100kHz (+/- 0.5dB)
De-Esser
0 to -16dB @6kHz
Attack Time
0.5 mSec. to 100 mSec.
Release Time
50mSec. to 3 Sec.
Slope
1.2:1 to ∞:1, selectable in 12 steps
Total Harmonic Distortion
<0.05% (typical) 20-20kHz
C.M.R.R.
80dB typ.
Power Requirements
Input Requirements: USA – 85 to 250 VAC / 50-60 Hz
Export units configured for country of destination.
Output Requirements: 48 V dc, 10 Watts
Chassis
Steel, Painted finish
Dimensions
1.75″H x 19″W x 9.5″D (44mm x 483mm x 241mm)
Weight
7.95 lbs (3.62 kg)
Notes
With the locking power supply plug connected, the depth increases to 11.6-inch (295mm) total 

0 dBu = 0.775 VRMS

ART maintains a policy of constant product improvement. Therefore, specifications are subject to change without notice.