JBL - Control 52-WH

Artnr: IDS0049636
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

The stylish Control 52 satellite loudspeaker produces superb high fidelity sound via a lowdistortion 60 mm (2.5 in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45 off-axis.

Features:

Stylish, unobtrusive design fits into a wide variety of decors

High fidelity sound

Selectable 70V/100V for distributed lines, or low impedance

Versatility for either two or four satellite speakers per system

Ability to mix and match with Control Contractor40 Series inceiling models

Wall-mount brackets included

Available in black or white

Specifications:

Frequency Range (-10 dB): 140 Hz - 20 kHz

Frequency Response (+/-3 dB): 180 Hz - 17 kHz

Power Capacity: 50 Watts ContinuousProgram Power (2 hrs)25 Watts ContinuousPink Noise (2 hrs)30 Watts ContinuousProgram Power (100 hrs)15 Watts ContinuousPink Noise (100 hrs)

Nominal Sensitivity: 85 dB (4.0V/1m = 1W)82 dB (2.83V, 1m)

Nominal Coverage Angle: 150 x 150 (omnidirectional)

Rated Maximum SPL (1m): 94 dB average, 100 dB peak

Nominal Impedance: 16 ohms

Transducer Driver: 60 mm (2.5 in) with polypropylene cone, butyl rubber surround, 19 mm (0.75 in) copper-clad coil, vented Nomex former, secondary bucking magnet, and copper sleeved pole piece for high frequency extension.

Input Connector: Removable locking 2-pin connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)

Material: High impact polystyrene, painted zinc-plated metal grille.

Dimensions (H x W x D): Cabinet: 115 x 84 x 96 mm (4.5 x 3.3 x 3.75 in)Wall bracket: 51 mm (2.0 in)

Net Weight: 0.7 kg (1.5 lbs)

Shipping Weight: 0.8 kg (1.8 lbs)

Included Accessories: Wall bracket (both speaker and wall parts), 2-pin locking connector.