DAP Audio - NRG-12 Mobile

Artnr: IDS0126569
Tarneaeg: 6-14 tööpäeva.

Teave:

12" battery speaker with Bluetooth 5.0
120 W RMS, max SPL of 113 dB at 1 m
60 - 20,000 Hz frequency range
Dedicated mic and aux inputs
Bluetooth 5.0 with True Wireless Stereo
Internal DSP

The DAP NRG-12 Mobile is a full-range, battery-powered speaker with Bluetooth 5.0. It has a peak power output of 200 watts with 120 watts of continuous RMS power. With the separately available standard 12 V battery, the NRG-12 Mobile has a run time of approximately 20 hours at an average volume, more than enough to get through any occasion. The built-in amplifier has a 3-pin XLR/jack combo microphone input and a mini-jack auxiliary input that each have their own volume controls. There's also a separate volume control for the Bluetooth connection and the speaker offers True Wireless Stereo when connected to a second speaker. When it comes to DSP settings, the NRG-12 Mobile makes use of an EQ knob that crossfades between a flat setting, a contour setting and everything in between, providing customised control over the sound. LEDs on the back of the speaker show different statuses, including when the limiter kicks in and how much power the battery has left.

Specifications
Outputs
Power Amplifier RMS Output
120 W
Power Amplifier Peak Output
200 W
Inputs
Mono Inputs
1
Mono Input Connector
3-pin XLR
Auxiliary Inputs
1
Auxiliary Input Connector
TS unbalanced 3.5 mm
Audio Specifications
THD Level
< 0.5 %
Speaker Sensitivity (1 W/1 m)
95 dB
Maximum SPL at 1 m
113 dB
Frequency Response Minimum
60 Hz
Frequency Response Maximum
20000 Hz
Woofer Diameter
12 "
Woofer Voice Coil Diameter
2 "
Woofer Magnet Type
Ferrite
Compression Driver Diameter
1 "
Compression Driver Voice Coil
1.4 "
Compression Driver Magnet Type
Ferrite
Dispersion Angle (Horizontal)
90 °
Dispersion Angle (Vertical)
60 °
Battery
Battery Type
Lead-Acid
Battery Voltage
12 V
Capacity
10 Ah
Runtime @Full
8 h
Runtime Average
20 h
Charging Time
10 h
Electrical Specifications and Connections
Power Supply
220-240 V AC 50 Hz
Power Consumption
100 W
Power Connector In
IEC
Mechanical Specifications
Height (mm)
575 mm
Width (mm)
345 mm
Depth (mm)
360 mm
Material
Plywood
Weight
21 kg
IP Rating
IP20 (indoor use only)
Colour
Black