HK Audio - CX12L
Artnr: IDS0092108
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »
Teave:
With the benefit of its dual-purpose housing, the CX 12 can serve as both an FOH and a monitor speaker. This unit‘s hallmarks include extremely high maximum SPL and excellent speech intelligibility. The CX 12‘s high-frequency horn was optimized using the BEM (Boundary Element Method). Its phase response is uniform; its dynamic range astonishingly wide. All this adds up to a high-definition, strikingly transparent audio image with very precise directivity. What‘s more, multiple units are easily clustered. A high-quality PU finish and a front grille with anticorrosive coating provide armor-like protection on the road. The Speakon Pin Assignment switch on the rear panel sets the input signal to 1 +/- or 2 +/-. The CX 12‘s low-profile housing makes it the stage monitor of choice for demanding performers. It comes in left and right versions for symmetrical monitoring arrays. And if you wish set up a powerful two-way active system, we recommend that you pair this enclosure with HK AUDIO CS 118 or CS 218 subwoofers. It achieves the best audio results when paired with a Lab.Gruppen PLM+ power amp with a LAKE controller as well as with a Powersoft X-Series power amp. Applications: Fullrange sound reinforcement, near-field sound reinforcement with high SPL requirements, e.g. as an FOH top unit, front-fill, side-fill or drum-fill top unit and as a monitor on large stages
Effective maximum sound pressure level while ultra-precise coverage of frequency spectrum and minimal distortion.
Solid birch multiplex construction for the demands on the road and long-lasting touring
Including a vast, praxis-oriented equipment
Many rigging and mounting options
Highly-integrative system and part of the new HK Audio rental portfolio
Techn. Data
CX 12
Power-handling nominal (RMS) 500 W
Power-handling, program 1000 W
Frequency response +/-3 dB 70 Hz – 18 kHz
Frequency response -10 dB 61 Hz – 19 kHz
Sensitivity 1 W @ 1 m 99 dB (100 Hz – 10 kHz), full space
Max. SPL @ 10% THD (EN 60268-21:2019) 131 dB
Electrical impedance 8 ohms
Low/mid speaker 1x 12", 3" voice coil
HF Driver 1.4", 3" voice coil
Directivity 75° x 55°, rotatable CD horn
Crossover frequency 1.2 kHz, 24 dB/oct.
Connections 4x Speakon NL4 (with sealing cap), pin assignment switch
Angles up 35°/55° (monitor / frontfill)
Pole mount DuoTilt 3°/7°
Rigging points 10x M10, 1x Aeroquip
Carrying handles 3x recessed grip
Housing Birch multiplex
Finish PU coating black
Front grille Steel front grill with anticorrosive coating, acoustic foam
Dimensions (WxHxD) 37,5 x 67 x 33 cm 14-49/64 x 26-3/8"
Weight 22.8 kg / 50.2 lbs