Yamaha - DHR12M

Artnr: IDS0125323
Tarneaeg: 6-11 tööpäeva.

Teave:

The DHR12M is an active loudspeaker with an amplifier for each of the two units of 12 and 1.75 inches, installed in coaxial configuration. The compact design and upward angled units make the speaker ideal as a floor monitor. The DHR12M delivers best-in-class sound, packaged in a solid plywood construction with compact size.

2-way, Bi-amped Powered Speaker, Bass-reflex
Frequency range (-10dB) 55 Hz - 20 kHz
Coverage area H90 x V90
Crossover 1.8 kHz: FIR-X tuning™ (linear phase FIR filter)
Maximum Output Level (Measured peak, IEC noise@1m) 129 dB SPL
Components LF Diameter: 12" cone, Voice Coil: 2.5", Magnet: Ferrite
HF Diaphragm: 1.75", Type: 1" throat coaxial compression driver, Magnet: Ferrite
Amplifier class Class-D
Power rating Dynamic 1,000 W (LF: 800 W, HF: 200 W) *1
Continuous 465 W (LF: 400 W, HF: 65 W)
Cooling Fan cooling, 4 speeds
Power consumption 74 W (1/8power), 18 W (Idle)
Power requirements 100 V, 100-120 V, 220-240 V, 110/127/220V (Brazil), 50/60 Hz
A/D D/A Converters 24 bit 48 kHz Sampling
Processors HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF
I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Cabinet material Plywood
Finish Durable Polyurea Painting, Black
Handle Side x1
Pole socket Φ35 mm x1 (Bottom)
Rigging -
Floor Monitor Angle 57°
Dimensions W 500 mm (19.7")
H 343 mm (13.5") (with rubber feet)
D 454 mm (17.9")
Net weight 16.5 kg (36.4 lbs)