myVolts - Hot Tip Power Supply Tester/Polarity tester

Artnr: IDS0120425
Tarneaeg: 2-7 tööpäeva.

Teave:

Power Supply Tester
Hot Tip is a power supply tester - it lights up when you connect a working power supply to it.

Uh-oh. Something's not coming on - but is the plug or the device that's dodgy? It's easy to test a plug with the Hot Tip. Just plug the power supply into the wall, then connect it to the Hot Tip - the LED illuminates if there's power, so you'll know if your plug is good or bad.

The female end of Hot Tip accepts a standard 5.5mm outer diameter / 2.1mm inner diameter barrel tip - it's the commonest size, usedon 98% of effects pedals, synths etc.

If you want to test a power adaptor with a different size output, just add the sizes you want to your cart, and we'll send you the parts to fit.

Power Passthrough
Hot Tip doesn't get in the way of the power - you can power a device through it.
You can power a device without removing the Hot Tip from the PSU tip end - the LED draws almost no power, so you can go ahead and plug the tip end of Hot Tip into your device. That's handy for dark environments, like on a stage - or anytime you want to know and be sure there's power available. (The only works for gear that Hot Tip fits into, 5.5mm outer diameter and 2.1mm inner diameter).

Polarity Indicator LED
Hot Tip illuminates BLUE for centre positive polarity, and RED for centre negative polarity.
Power supplies got mixed up, now you're not sure what polarity which PSU is? Hot Tip contains a bi-colour LED, and lights up BLUE when the connected PSU is polarity centre positive (BLUE C +) and RED when the connected PSU is polarity centre negative (RED C -). It's written on the Hot Tip too, so you don't need to remember it.