dj service
shopping_cart
myVolts CC55P2 Crazy Chain MKII

myVolts CC55P2 Crazy Chain MKII

myVolts - CC55P2 Crazy Chain MKII

Artnr: IDS0126530
Tarneaeg: 2-7 tööpäeva.

11.00 EUR/tk

Teave:

CC55P2 Crazy Chain MKII for powering Elektron synths & more
myVolts Crazy Chain MKII is a flexible, mix and match cable solution to let you power your gear just the way you want to.

Did you ever want to power a number of synths and pedals, but find that your existing daisy chain cable just didn't cut it? Wrong size connectors, wrong polarity, unused connectors, unsuitable cable lengths can all be a hassle you don't need when you just want to make music.

You choose which DC power tip size each Crazy Chain MKII connector has, so you can power, for example, a Korg Volca (1.7mm inner diameter / 4.75mm outer diameter) from the same 9V DC power source as a Empress ZOIA effects (2.1mm inner diameter / 5.5mm outer diameter). Mix and match tips to suit exactly your devices. All devices in the same chain need to have the same DC voltage.

You can change polarity from positive to negative as you go along the chain, you can even change it back! The bicolour LED shows you which polarity is outputting. Just make sure to check your instrument specification to ensure it receives the correct polarity.

Crazy Chain MKII lets you power only the devices you want to power, whether that's 3 devices or 12 devices. This means no more looking for extra connectors to suit your specific setup, and no more hanging dog-leg connectors adding noise into your audio.

Choose from different cable lengths to suit your setups.

What's new with Crazy Chain MKII?
Robust cabling can handle up to 100W power (20V at 5A)
Discreet bicolour LED assures that power's ready to go, and at the right polarity (blue for centre positive, red for centre negative)
Female input has "gear friendly" angle for neater connections
Part of the myVolts Step-Up USB-C range, Crazy Chain MKII is fully compatible with all myVolts Step-Up cables and power sources
Backwards compatible with myVolts Ripcord
Compatible also with standard wall warts and other power sources
Spec for CC55P2 Crazy Chain MKII for powering Elektron synths & more
Female input: 2.1mm inner diameter / 5.5mm outer diameter
Male output 1: 2.1mm & 2.5mm inner diameter / 5.5mm outer diameter
Male output 2: 2.1mm & 2.5mm inner diameter / 5.5mm outer diameter
Cable length: 30cm
Model: CC55P2