Tech21 - Paul Landers PL1 Signature Fly Rig

Artnr: IDS0114445
Tarneaeg: 2-7 tööpäeva.

Teave:

Paul Landers has been a long-time user of Tech 21 gear, both the SansAmp GT2 and SansAmp PSA, which is especially prominent in their worldwide smash “Du Hast.” While he liked the format of the Fly Rigs, Paul was looking for a different feature set. Given Paul’s long term relationship with Andrew Barta, it was a no-brainer to collaborate on a Fly Rig to fulfill his individual needs. The Paul Landers PL1 Signature Fly Rig offers 2 SansAmp channels, one clean and one dirty. Like our other Fly Rigs, it offers the same ease, portability, confidence and multi-functionality for going direct to a mixer or P.A. and as a pre-amp/stompbox in live performances.Specifications

SANSAMP FEUER (Fire) and SANSAMP WASSER (Water)The Paul Landers Signature Fly Rig features two all-analog SansAmp channels to switch between dirty and clean tones.

The Feuer section has 3-band active EQ controls with switchable Mid, Drive and Level.
The Wasser section has dual-band active EQ controls, compression, and Level.

There’s a Bite switch for a presence boost which provides extra clarity to the top end, increased definition to your notes, and an edginess with increased harmonics and a slight breakup.

DLA WITH TAP TEMPO + VIBRATO + AMBIANCE
 Delay is voiced for the sounds of a vintage tape echo. It features Time and Repeats controls and dedicated Tap Tempo footswitch.
Vibrato alters the functions of Time and Level: Time controls the speed of the vibrato. Min = Slow; Max = Fast. Level adjusts the depth of the vibrato. In Vibrato mode, you can use the Tap Tempo to control the speed.
Ambiance provides a smooth, full sweep to easily dial-in the amount of ambiance desired. Choose from: Out position = Close mic’d ambiance. In position = Standard room ambiance.
BOOST

Independent dual-mode Boost function. Post-SansAmp positive boost up to +6dB and “negative” boost down to -10dB.

TUNER

Chromatic Tuner is operable via the TAP/TUNER footswitch in the DLA section. You simply hold the footswitch down to engage the Tuner, which simultaneously mutes the signal path.

ADDITIONAL FEATURES1/4-inch 1megOhm input
XLR?output with ground lift
1/4-inch low impedance output
Headphone button switches the 1/4” output into headphone mode
Rugged, all-metal housing
Metal footswitches and jacks
Silent-switching, custom footswitch actuators
Utilizes included 9V DC Universal Power Supply: Model #DC9.