Music Nomad - MN860 Tracers Fret Finishing Kit

Artnr: IDS0129955
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

MusicNomad MN860 Tracers Finishing Kit for fret polishing
Tracers Fret Finishing Kit contains what you need to polish your frets on the fretboard e.g. after crowning the frets or sanding down sharp fret ends.

The kit contains two different blocks where you thread the sandpaper. Both blocks are ergonomically designed to make the job easier and have ready-made grooves so you can sand the bands regardless of size and shape. The sandpaper comes in four different grit sizes, 1000, 3600, 6000 and 12000 which are labelled in the order they would normally be used 1, 2, 3 and 4.

The 2 ‘n 1 Tracers Fret End block is also designed so that you can easily polish the belt edges as well.

The kit comes in a practical storage box and if you need new sanding papers, you can buy these as a kit, MN861 Replacement Tracers Pads.

MusicNomad MN860:

2 x Tracer Handle blocks
4 x Micro-Mesh Loops sandpaper for belt polishing (1000, 3600, 6000, 12000 grit)