Neumann - KH 870 G

Artnr: IDS0044569
Tarneaeg: 3-14 tÃ¶Ã¶pÃ¤eva.

Teave:

The Neumann KH 870 G is an active subwoofer featuring two 10 inch woofers designed to complement the Neumann range of monitors. The KH 870 offers a 7.1 High Definition Bass Manager™ that is compatible with all standard consumer formats from mono through to the latest 7.1 HD systems.

Eight channels of analog or an optional 8-channel, 24-bit, 192 kHz digital input card ensures flexible interconnectivity for modern studios. Four-mode LFE-channel processing guarantees compatibility across all formats and industries. Forth-order crossovers and flexible acoustical controls allow for seamless system integration. Built-in volume control and a hardware remote control allows for centralized system control independent of the source, and the electronics can be remote located to reduce cabling

The latest amplifier technology and acoustical components have been used to ensure the most accurate sound reproduction possible. Robust drivers, a rock-solid cabinet, and carefully designed ports guarantee a tight, articulate, and distortion-free low frequency reproduction, even at high replay levels. Using the sum output, Plane Wave Bass Array™ (PWBA™) techniques acoustically improves lateral consistency in the listening area. The bass extends down to 18 Hz.

The KH 870 subwoofer is designed to complement our extensive range of monitors, and can be used on its own, or daisy-chained to make larger systems capable of higher SPL. The KH 870 can be used in music, broadcast, and post production studios for tracking, mixing, and mastering. The cabinet can be positioned next to a wall or flush mounted into a wall due to the front mounted port, and can be mixed freely in multichannel systems with other loudspeakers from the Neumann range.

Neumann KH 870 G Features

Flexible electronics

7.1 Channel High Definition Bass Management™ compatible with all formats from mono to 7.1
Bypassable 4th order 80 Hz active crossover for maximum compatibility with consumer reproduction
0 and +10 dB LFE gain and 4-mode LFE processing:
LFE to subwoofer and left/right
LFE to subwoofer only up to 80 Hz
LFE to subwoofer only up to 120 Hz
LFE to subwoofer with no filtering – for daisy chaining subwoofers and external signal processing systems
Independent control of bass management for front and back channels
System wide volume control via optional hardware remote controls or RS-232
Acoustical controls adapt the subwoofer’s response to the environment
Output level
Low cut
Parametric equalizer
45° step phase control with a built-in test signal
Larger systems and Plane Wave Bass Arrays™ maybe constructed using the Sum output
Remoteable electronics (REK 3 and an SC nn) for installation convenience, less cabling, and convenience of use
Integrated electronic limiter for amplifier and driver protection
Low heat dissipation amplifiers
Electronics can be remotely powered on with two modes of operation (0 V and 12 V trigger)
Robust drivers and cabinet

Low frequency extension for main loudspeakers down to 18 Hz
Low distortion magnetically shielded long-throw drivers
Reduced bass compression at high SPL from generously proportioned bass reflex ports
Large system with 6 dB higher output than KH 810
A main loudspeaker can be mounted onto an KH 870 to make a large 4-way column system
Allows main loudspeakers to play louder and with lower distortion
Wooden cabinet with a tough painted finish (anthracite or silver) and high density rubber isolating feet
Excellent self-damping properties leading to minimal cabinet resonances
Cabinet look conforms to the family design
Neumann KH 870 G Specifications

Acoustics

?3 dB free field frequency response: 18 - 300 Hz, ± 3 dB
Pass band free field frequency response: 19 - 300 Hz, ± 2 dB
Self-generated noise level at 10 cm: < 20 dB(A)
Total harmonic distortion < 0.5 % at 95 dB SPL at 1 m: > 40 Hz
Max. SPL In half space at 3% THD: 116.7 dB SPL
Max. SPL with pink noise in half space at 1 m: 118 dB SPL
Averaged between: 40 and 90 Hz
Electronics

Amplifier, cont. (peak) output power (THD < 0,1 %): 320 W (400 W)
Controller design: Analog, active
Main channel crossover frequency: 80 Hz
Crossover slope: 24 dB/oct
Equalization - Low cut: 30 Hz, 0 … ?12 dB
Parametric Equalizer: Bypassable
Parametric Equalizer - Gain: +4 … ?12 dB
Parametric Equalizer - Frequency: 20 … 120 Hz
Parametric Equalizer - Q: 1 … 8
Time of Flight adjustment delay: 0 … 4.69 ms @ 80 Hz (4-step 0, 45, 90, 135), - 180° Switch
Volume Control: Hardware remote or RS-232
Calibration Tools: Internal signal generator
Protection circuitry: Peak and Thermo Limiters
Infrasonic filter frequency; slope: 6.5 Hz; 12 dB/oct.
Remote control: On a CAT-5
Analog Inputs and Outputs
Input/Output channels: 7.1 / 7+Sum
Impedanz electrically balanced: XLR, 13 k?
Input sensitivity: ?8 and +6 dBu
Max. input level: +19 dBu (6.9 Vrms) / per channel
CMRR: > 60 dB @ 15 kHz
Interchannel isolation (1 kHz), level matching: ?95 dB, ±0.1 dB
Volume control range, resolution: 118 dB, 0.25 dB
Dynamic range, THD+N: 119 dB(A), LFE Modes: 80+re-routing, 80, 120, wide
LFE Gain: 0 / +10 dB
Gain Control: +2 … ?12 dB
Displays and indicators:
power on: Red LED
limit/clip: Red LED “Flashing”
bass management active: Green LED
Mains power: 220 - 240 / 100 - 120 V AC (switchable)
Power consumption - Idle: 25 W
Power consumption - Full output: 550 W
Mechanics

Cabinet surface finish: Painted
Color: standard: Anthracite (RAL 7021)
Baffle cover: Included metal grille
Drivers: Magnetically shielded
Woofer: 2 x 265 mm (10")
Height x width x depth: 735 x 330 x 645 mm (28.9" x 13" x 25.4")
Internal net volume: 86 l
External volume: 156 l
Weight: 47,1 kg (103.6 lbs)
Delivery includes: 1x KH 870
3x Power cables (Euro, UK, USA)
1x Operating manual
1x Supplement "Getting Started Quickly"