Proel - LT812A

Artnr: IDS0117173
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

LT812 A Professional 2+1 Audio System
Active speaker system with plywood cabinet offering the renowned Proel sound and a high-level performance in a reliable and affordable package. Strong, anti-scratch paint and steel grille with an internal foam layer provide proper protection for years of service. 
For the high frequency reproduction wide-dispersion horns are used, able to provide constant coverage for large audiences and detailed response with low distortion. The high-excursion woofers, together with carefully tuned vented cabinets, offers an extended response with deep and tight basses. The extremely lightweight power modules used in the active models feature the latest technologies for amplification, such as Switch Mode Power Supply and Class D output stages, which provides a massive amount of power with a reduced weight. The power modules are hosted in fully-sealed die-cast aluminum boxes that provides protection, perfect insulation of the cabinet from the outside and extremely efficient cooling. Each module includes a sophisticated pre-amp section with up to 24 dB/ oct. phase aligned crossover filters and active EQ fi lters for the system’s fine tuning. The DUAL LIMITER circuit ensures an undistorted sound even at the loudest level and a total loudspeaker protection. 

LT812SAT
System type: 2-way vented enclosure
High Frequency Device: 1” compression driver with 1" VC
Low Frequency Device: 8” woofer with 1.5” VC
Angular Coverage: 60° H x 40° V
Total peak power: 1600 W
Amplifier Continuous Power: 2 x 200 W Class AB
Power Supply: SMPS
Processing: Analog
Frequency Response: 45 Hz - 20 kHz
Max SPL: 121
Connectors: 1 x SPEAKON
Construction: Plywood
Cabinet Colour: Black
Handles: 1 x rear
Mounting Pole: 1 x bottom, dual angle
Dimensions (W x H x D): 220 x 442 x 260 mm
Weight: 7.5 kg

LT812SUB
System type: Vented sub-woofer
Low Frequency Device: 12” woofer with 3” voice coil
Total peak power: 1600 W
Amplifier Continuous Power: 400 W Class D
Power Supply: SMPS
Processing: Analog
Frequency Response: 45 Hz - 20 kHz
Max SPL: 124
Connectors: IN: 2 x COMBO, LINK: 2 x XLR M; OUT: 2 x SPEAKON
Controls: SUB LEVEL, GND LIFT
Construction: Plywood
Cabinet Colour: Black
Handles: 2 x sides
Mounting Pole: 1 x top
Power Supply: 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector
Dimensions (W x H x D): 475 x 462 x 610 mm
Weight: 34 kg