sE Electronics - sE4400a ST

Artnr: IDS0020223
Tarneaeg: 2-10 tÃ¶Ã¶pÃ¤eva.

Teave:

A Must-have Mic for Stage and Studio!
A perfect all-arounder! Many mics claim to be able to do anything, but this one really can! The sE4400a is as at home above a drum kit as it is in front of a screaming tube amp - and it can still handle more subdued sources such as vocals. Using a twin-diaphragm design, the sE4400a sports cardioid, hypercardioid, omni, and figure 8 polar patterns, letting you put this black beauty to work doing just about anything. While the sE4400a takes its cues from the sE2200a, the sE4400a spent nearly two years being tested in professional studio and broadcast facilities around the world to make sure it was truly an all-around sucess.

But a great-sounding mic is only truly helpful if it's easy to position - and the sE4400a is very easy to get where you want it. The sE4400a is one of the smallest large-diaphragm mics around, letting you slip into places most mics can't go. Plus, the flat-fronted sE4400a lets you get right up on a grille cloth for an up-front sound. Each sE4400a comes with a unique shock mount which allows you to fit the mounted mic into tiny spaces, or invert the shock clamp to extend the mic fully outside the shock mount for close mic-ing applications or vocals. It also comes with a full, steel re-enforced, black aluminium, and signature sE flight case. Plus, the rubberized black finish doesn't interfere with stage lights.

sE Electronics sE4400a Condenser Microphone Features at a Glance:

Frequency Response: 20Hz-20KHz
10/20dB pads
Sensitivity: 14.1mv/pa-37db ± 1dB
Polar Pattern: Cardioid, Figure 8, Omni, supercardioid
Impedance: less than or equal to 50 Ohms
Equivalent Noise Level: 17dB (A weighted)
Max SPL for 0.5% THD@1000Hz: 130dB
Power Requirement: Phantom power 48V±4V
Connector: 3-pin

Above a drum kit, on an amp, on vocals, and much more, the sE Electronics sE4400a can do it all!
Specification Detail
Microphone Type Condenser
Polar Pattern Cardioid, Supercardioid, Omni, Figure-8
Diaphragm Size 1" (25.4mm)
Frequency Response 20Hz-20kHz
Max SPL 130dB SPL (1kHz at 0.5% THD)
Output Impedance 50 ohms
Self Noise 17dB (A weighted)
Low Cut Filter 60Hz, 120Hz
Pads -10dB, -20dB
Color Black
Connector XLR
Weight .6 lb.
Included Accessories Shock mount, Aluminum carry case