Icon - AirMon Pro

Artnr: IDS0124578
Tarneaeg: 4-10 tööpäeva.

Teave:

The AirMon Pro is a wireless monitoring system consisting of two modules: a transmitter and a receiver. The system is expandable with limitless receivers per transmitter and up to three transmitters per immediate area, depending on Wi-Fi strength.

Super low latency was at the top of the agenda in the design brief, as was the highest possible audio quality. The signal is transmitted digitally via 2.4 GHz. The available sample rates are 32K, 48K (16 bit mono) or 96K, the latter offering extremely high audio quality, 24-bit stereo signal. This represents unsurpassed audio quality for products of the AirMon Pro’s type and class.

Ideal for podcasters and performers who demand not only professional, but exemplary standards in audio quality, this uniquely advanced system offers robust, intelligent build quality, coupled with a stylish, sleek design.

Sleek, super compact and stylish design
Uncompressed digital transmission up to 24-bit/96KHz sampling rate
2.4GHz proprietary encryption technology for ultra-low latency for wireless transmission (less than 1.58ms)
Infinitely expandable – use unlimited receivers per one transmitter
16 different selectable channels for multiple, individual transmissions simultaneously (use up to three transmitters in one location, depending on Wi-Fi signal)
Uniquely innovative technology allows the user to select transmission sample rate from 32K, 48K MONO or 96K STEREO
Headphone output port (3.5mm)
Simple one button pairing technology
Type C USB connector for charging
Included USB C Y cable for convenient charging (both units at the same time)
Rechargeable battery for both transmitter and receiver
Belt clip fixture (receiver)
Approximately six hours use on a full battery charge

Tech Specs

Audio - Transmitter

Sampling bit rate:

96KHz
24bit
48KHz
16bit
32KHz
16bit
Channel Mode

96KHz
STEREO
48KHz
MONO
32KHz
MONO
Input Level
-3dBV
Input Impedance
10K ohm
Audio - Receiver

Sampling bit rate:

96KHz
24bit
48KHz
16bit
32KHz
16bit
Channel Mode

96KHz
STEREO
48KHz
MONO
32KHz
MONO
Output Level
16mW
Output Impedance
32 ohm
Radio Frequency - Transmitter

Operating Frequency
2400MHz-2483MHz
Digital Modulation
GFSK
Occupied Bandwidth
4MHz +4MHz
Transmission output
10mW
Selectable Channel
16 channel
Radio Frequency - Receiver

Operating Frequency
2400MHz-2483MHz
Digital Modulation
GFSK
Occupied Bandwidth
4MHz +4MHz
Receiving Sensitivity
-85dBm
Selectable Channel
16 channel
Power - Transmitter

Current consumption
140mA
Power Requirements
Built-in rechargeable LiPo battery charged via USB 5V, 0.5A
Battery Operating Time
6 hours for 1000 mA use
Power - Receiver

Current consumption
90mA
Power Requirements
Built-in rechargeable LiPo battery charged via USB 5V, 0.5A
Battery Operating Time
11 hours for 1000 mA use.
Dimensions and Weights - Transmitter

Dimensions (WxDxH)
53mm x 71mm x 21mm (2.1"x2.8"x0.8")
Weight
82g
Accessory
USB Recharing cable and storage pouch
Dimensions and Weights - Receiver

Dimensions (WxDxH)
44mm x 61mm x 21mm (1.7"x2.4"x0.8")
Weight
40g
Accessory
USB Recharing cable and storage pouch