Avantone Pro - CK-6 Classic

Artnr: IDS0096326
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

The CK-6 Classic in its normal stock version uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents our commitment to quality as these normally are the type of "upgrade" components that are implemented by microphone modders/hot-rodders! Any studio can proudly offer the CK-6 Classic for instrumental and vocal miking. It exudes class visually as well as sonically.

The CK-6 Classic has separate -10 dB pad & 80 Hz LF roll off switches....The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track.

Specifications

Type: True Transformerless Condenser
Polar Pattern(s): Cardioid
Capsule: Single-sided 32mm center-terminated gold-sputtered Mylar (6 micron)
Frequency Response: 35-20,000 Hz +/- 3.5dB
Output Impedance: <=200 Ohms
Maximum SPL: 136dB (0.5% THD @1000Hz)
Equivalent Noise Level: <17dB
Output Connector: Male XLR 3-pin
High-Pass Switch: 80 Hz 6dB/octave
Attenuation Switch: -10 dB
Power Requirement: Standard 48 Volt Phantom / 5mA

Included Accessories

Shockmount
Carrying pouch
White foam cardboard gift box