» Stuudio » Mikrofonid » DPA 4041-SP Large Diaphragm Stereo Kit, P48

DPA - 4041-SP Large Diaphragm Stereo Kit, P48

Artnr: IDS0048077
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

The d:dicate™ 3532-SP is a complete state-of-the-art A-B Stereo Kit with two d:dicate™ 4041-SP Microphones. They are carefully matched within ±0.5 dB on both frequency response and sensitivity in the entire frequency bandwidth.

This A-B stereo kit is the ultimate choice for the demanding engineer and audio purist who emphasizes clarity, openness, precision, low self-noise and high sensitivity.

The kit is designed for a broad range of uses; for classical, jazz and folk genres, grand pianos, guitars, overheads or close-miking drums, choirs, strings, wind instruments and much more.

You get a bright and transparent sound quality with lots of headroom. With its soft boost, which is present on-axis, and gradually goes towards linearity off-axis, these omnidirectional microphones can be angled to use as a natural equalizer. These mics are a part of the d:dicate™ Recording Microphones Series.

The microphone capsule

The diaphragm and housing are both made from stainless steel. This gives the capsule a unique immunity against ambient temperature variations. The precision-made back plate is placed in a quartz insulator for maximum electrical stability. This gives the MMC4041 Large Diagram Capsule a unique sensitivity of up to 90 mV/Pa.

The 4041-SP has a frequency response from 10 Hz to 20 kHz with a 4-6 dB soft boost around 8 kHz. Furthermore, the MMC4041 Large Diaphragm Capsule has extremely low self-noise of 7 dB(A) with theMMP4000-S. It also has enhanced SPL handling capability of up to 144 dB SPL before clipping occurs.

The MMC4041 Large Diaphragm Microphone Capsule can be unscrewed from the MMP4000-SP preamplifier, which allows you to exchange the preamplifier.

d:dicate™ 3532-SP STEREO KIT WITH 4041-SP LARGE DIAPHRAGM OMNIDIRECTIONAL MICROPHONES, P48

Directional pattern

Omnidirectional

Principle of operation

Pressure

Cartridge type

Condenser w. stainless steel diaphragm

Frequency range

20 Hz - 20 kHz

Frequency range, ±2 dB

20 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz

Sensitivity, nominal, ±2 dB at 250 Hz

70 mV/Pa; -23 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Max. 8 dB(A) re. 20 µPa

Equivalent noise level, ITU-R BS.468-4

Max. 20 dB

S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)

86 dB(A)

Total harmonic distortion (THD)

< 0.5% THD up to 120 dB SPL peak, < 1% THD up to 126 dB SPL peak

Dynamic range

Typ. 118 dB

Max. SPL, peak before clipping

134 dB

Output impedance

< 200 Ω

Cable drive capability

Up to 100 m (328 ft)

Power supply (for full performance)

Via external power supply

Current consumption

2.20 mA

Connector

3-pin XLR-M (Standard P48)

Weight

190 g (6.7 oz)

Capsule diameter

24 mm (1 in)

Microphone length

170 mm (6.7 in)

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90%

Matching tolerance (frequency response and sensitivity)

±0.5 dB

Phase deviation for kit

< 5°