Antelope Audio - Edge Quadro
Artnr: IDS0078877
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »
![Antelope Audio](https://www.djservice.se/bilder/tillverkare/antelopelogo.webp)
Teave:
Edge Quadro is the most advanced modeling microphone by Antelope Audio. This stereo mic features two large dual-membrane capsules and a rotating head.
Delivering four channels for independent processing will allow for stereo techniques like M/S, X/Y, Blumlein, and even 3D sound. Edge Quadro is the only microphone you’ll need for stereo and 360° sound recording.
• ONE-OF-A-KIND QUADROSONIC MODELING MICROPHONE
• ROTATABLE HEAD WITH LARGE DOUBLE-MEMBRANE CONDENSER CAPSULES
• AUDIO SIGNAL SPLIT INTO 4 INDEPENDENT XLR OUTPUT CHANNELS FOR OPTIMUM CONTROL AND RE-MICING
• SWITCHABLE PATTERNS: CARDIOID, FIGURE-8 AND OMNIDIRECTIONAL
• INDIVIDUAL MIC EMULATION AND POLAR PATTERN SELECTION FOR EACH HEAD
• INFINITE TOP HEAD ROTATION FOR MAXIMUM FLEXIBILITY
• ULTRA-LOW REFLECTION, FULLY SYMMETRICAL TOP AND BOTTOM HEADS
• EXTENSIVE LIBRARY OF VINTAGE MIC EMULATIONS
• CUSTOM LUXURY SHOCK MOUNT, TWO SPECIAL OXYGEN-FREE COPPER Y-CABLES AND A CUSTOM HANDMADE WOODEN CASE INCLUDED
Available now
- BERLIN 47 FT
- BERLIN 49T
- BERLIN 57
- BERLIN 87
- BERLIN 67
- BERLIN M103
- VIENNA 12
- VIENNA 414
- TOKYO 800T
- OXFORD 4038
- SACRAMENTO 121R
Coming soon
- BERLIN K86
- BERLIN 47 TU
- BERLIN V563
- BERLIN/HALSKE M25
- BERLIN M251
- MINNESOTA 20
- ILLINOIS 7B
TECHNICAL SPECS
Microphone type: Quadrosonic condenser microphone
Diaphragms: Two large condenser capsules with double-sided 6u-gold sputtered membranes. Top head is fully rotatable.
Diaphragm diameter: 34mm
Polar pattern:
Multi-pattern (cardioid, figure-8, omnidirectional, Blumlein, M/S, X/Y)
XY-stereo – set both capsules to Cardioid, offset 90°
Mid-side stereo – set the top capsule to Cardioid, and the bottom capsule to figure-8
Blumlein – Set both capsules to Figure-8, offset 90°
Self-noise: 19dB(A)
SNR: 75dB(A)
Frequency response: 20HZ ~ 20kHZ
Sensitivity: -35dB | 18mV/Pa (-1 to +3dB)
THD+N: -116dB
Output impedance: 50 Ohms @ 1kHz
Power requirements: 48V DC phantom power
Output connector: 5-pin male XLR
Dimensions: 11,9″ x 2,1″ (303mm x 53mm)
Weight: 1.697 lbs (770 grams)
In the box
Breakout cable: Two 16.4′ (5 meters) 5-pin female XLR to dual 3-pin male XLR (high grade oxygen-free copper Y-cable)
Mount: Custom luxury shock absorber type
Case: Custom handmade wooden case