Presonus - Eris Pro Sub 10

Artnr: IDS0122367
Tarneaeg: 1-3 tööpäeva. Kaup on poes saadaval

Teave:

10-Inch, Active, Front-Firing Studio Subwoofer
Intended for serious personal studios and professional music-production environments, the Eris® Pro Sub 10 helps you take charge of the low-frequency foundation of your mix. An ideal companion to Eris Pro- and Eris Studio-series reference monitors, the Eris Pro Sub 10 complements full-range monitors without overshadowing them and extends the reach of your full-range system's low end with a natural sound.

Powerful and musical, the PreSonus® Eris Pro Sub 10 active, front-firing studio subwoofer is designed to deliver fast and accurate transient response, extending low frequencies down to 20 Hz, allowing you to hear the full-spectrum range of your mix. Driven by 170W (RMS) Class AB amplification, the Eris Pro Sub 10's 10-inch, glass-composite, low-frequency driver delivers tight, responsive sub-bass, thanks to its lightweight and rigid cone. This design provides lower distortion than other materials for sub-bass reproduction that's as coherent and clear as your full-range monitors.

Extensive user controls include input gain, continuously variable lowpass filter for creating a seamless crossover transition, and a switchable highpass filter that removes content below 80 Hz from the full-range signal sent to the monitors. A continuously variable lowpass filter (50 Hz to 130 Hz) allows you to create a seamless crossover transition between the full-range studio monitors and subwoofer for the most accurate listening environment possible.

Features
10-inch, front-firing, glass-composite, low-frequency transducer
Front-firing, bass-reflex acoustic port
Continuously variable lowpass filter (50 Hz to 130 Hz) sets the upper frequency reproduced by the subwoofer
Switchable highpass filter removes frequency content below 80 Hz from the full-range subwoofer outputs to the main monitors
Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
Input gain control (-30 dB to +6 dB, continuously variable), polarity invert switch, and ground-lift switch
170 watt (RMS), Class AB amplification for up to 113 dB SPL, with a frequency response of 20 to 200 Hz
Left and right, balanced XLR and ¼-inch TRS and unbalanced RCA main inputs
Left and right balanced XLR and ¼-inch TRS outputs and XLR subwoofer output for connecting a second Eris® Pro Sub 10

Highlights & Specs
Versatile Connectivity.
Eris® Pro Sub 10 subwoofers provide the connections needed to act as the central hub for a basic monitoring setup, including left and right balanced XLR and ¼-inch TRS and unbalanced RCA main inputs. Connect full-range monitors with left and right balanced XLR or ¼-inch TRS outputs. An XLR subwoofer output lets you connect a second Pro Sub 10.

Seamless System Integration.
The Eris® Pro Sub 10 integrates seamlessly with your full-range monitors. A variable lowpass filter sets the upper (crossover) frequency reproduced by the subwoofer. A switchable highpass filter on the full-range outputs helps avoid frequency cancellation and reinforcement in the subwoofer’s upper range, while a polarity-invert function ensures your system is in phase. A momentary footswitch (included) makes it easy to compare your mix with or without sub-bass frequencies.

Electronics
Voltage
120V
Wattage
250W Peak, 170W RMS

Hardware
Cabinet Material
Vinyl-Laminated, Medium-Density Fiberboard

Miscellaneous
Connection Type
IEC

Monitors
Protections
RF Interference
Output-Current Limiting
Over-Temperature
Turn-On/Off Transient
Subsonic Filter
Audio Switches
Polarity Switch: 0 degrees or 180 degreesGround Lift Switch: On/OffHigh Pass Filter Switch: On/OffBypass Footswitch: On/Off
Audio Controls
Input Gain Range: -30 to +6 dBLow Pass Filter Control: 50 Hz to 130 Hz
Peak SPL
113 dB (@ 1 Meter)
Monitor Inputs
2- Balanced XLR, 2- Balanced 1/4" TRS, 2- Unbalanced RCA
LF Transducers
10" Glass-Composite, Front-Firing
Frequency Response
20 Hz to 200 Hz
Monitor Amplifier Power
250W Peak, 170W RMS