EVE Audio - SC3010
Artnr: IDS0028152
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »
Teave:
The Eve Audio SC3010 uses a powerful amplification system with a customised PWM amplifier per driver built from the ground-up to deliver the lowest distortion possible, high sound pressure levels and optimised directivity. With 250W each for the Tweeter and mid-range driver, and an impressive 800W for the bass woofer alone, the SC3010 is capable of providing maximum SPL of 114dB.
The 10” SilverCone bass woofer with long excursion has also uses hexagonal glass fibre layered diaphragm that will reproduce all the audio content at all frequencies down to 30Hz even a high levels offering an impressively clean low frequency content. This is complemented by a 5” midrange unit made of layered glass fibred layered Rohacell sandwich diaphragm for midrange frequency reproduction. With the SC3010 Eve Audio has developed a brand new tweeter based on their high-performing Air Motion Tweeter technology with a 2.5 times bigger Ribbon tweeter called the AMT RS6. This new tweeter is capable of delivering Middle and high frequencies with superior precision.
High-resolution DSP electronics are at the heart of the SC3010 giving you access to accurate volume control as well as different filter settings to tune the sound of your monitors to your room. Using 24-bit/192kHz Burr-Brown A/D Converters ensures pristine signal to the DSP section. The PWM amplifiers are directly connected to the DSP removing the need for an additional D/A conversion.
Like all monitors by Eve Audio the SC3010 features a specifically designed large rectangle port with no hard edges ensuring best results with no bass distortion which helps deliver tight and punchy bass frequencies even at high volume. For in-wall installations, high-density foam is provided to close the port which, combined with the “inwall” filter settings, improve the quality and focus of the speaker.
The front plate of the speaker can be rotated so that speakers can be used horizontally or vertically to keep control room sight lines and acoustic performance.
Features:
- Three way Active Main Monitor
- Suitable for large recording studios and mastering facilities
- 10” SilverCone Bass Woofer with hexagonal glassfibre layered diaphragm
- 5” midrange driver with Glass fibre Rohacell sandwich diaphragm,
- Brand New AMT RS6 Ribbon tweeter
- High Resolution DSP controls volume and different filter options
- High powere PWM amplifier directly connected to the DSP
- 24-bit/192 kHz Burr-Brown AD conversion
- Large rectangular rear port with no hard edges reduces bass port distortion at high volumes
- Inwall filter settings for In-wall mounting
