Erica Synths - Fusion Ring Modulator V2

Artnr: IDS0124649
Tarneaeg: 10-30 tööpäeva.

Teave:

Erica Synths Fusion Ring Modulator – a classic design ring modulator with germanium diode ring + vacuum tube to boost and shape audio and carrier signals.
Features
 

Germanium diode ring

Audio transformers

Adjustable tube overdrive on both audio and carrier inputs

Colour switch to select between brighter and darker sound

 
Germanium diodes enrich the sound by adding extra harmonic content meanwhile vacuum tube adds evilish overdrive to audio and carrier signals. As a result you get one of the most versatile ringmodulators around!

All Fusion modules by default are configured to work with regular eurorack PSU.

Configurable power supply – standart eurorack +-12V conection OR eurorack +-12V plus Erica Synths Tube heater PSU

Due to the fact that cold tube heaters have lower resistance, Fusion modules have significant power consumption peak at startup, when power consumption almost doubles for 1-2 seconds. This is not a problem with linear PSUs that have power inertia, but may cause switching PSU internal protection turn off the power supply. Please make sure your PSU has some headroom before installing multiple Fusion modules.

Would I build a setup around valve modules? I was expecting to say no, but having spent time with the Fusion setup I’m surprised to say I actually would. It’s distinctive, it’s versatile, but more importantly it’s fun. Music has always been about philosophies and aesthetic choices; Erica understand that and offer something fantastically different with the Fusion series. These are not sterile, surgical tools. Far from it. And they’re all the better for that. - Attack Magazine

Technical specifications:
 

Input signal level
up to 20V ptp
Output signal level
10V ptp
Mixer GAIN
1
Power supply
bipolar +-12V , eurorack standard 
Power consumption
Eurorack PSU configuration: 160mA@+12V, 10mA@-12V
Module width
12HP
Module depth
25mm