ADAM Audio - T7V

Artnr: IDS0065875
Tarneaeg: 1-3 tööpäeva. Kaup on poes saadaval

Teave:

The T7V is a two-way studio monitor designed for vertical use in a nearfield application.

The T7V features a 7” woofer that provides bass extension down to 39 Hz, while the U-ART tweeter’s diaphragm provides pristine and extended high-frequency response up to 25 kHz – virtually unheard of in monitors in this price range. The U-ART tweeter is fitted to a precision waveguide with the same dispersion-control attributes as the High Frequency Propagation (HPS) waveguide used in ADAM Audio’s flagship S Series studio monitors. The waveguide’s highly uniform dispersion of high frequencies provides an incredibly wide sweet spot that frees you from being glued to a rigid mix position while working.

On the rear side of the T7V’s beveled cabinet, a rear-firing bass reflex port joins a sturdy metal backplate that’s home to the analog input connections. The U-ART tweeter is powered by a 20 W Class-D amp, while a 50 W Class-D amp serves the woofer. These new powerhouses yield an impressive maximum of 110 dB SPL per pair.

The wide frequency response, high dynamic range, excellent transient response, wide sweet spot and small footprints make the T7V perfectly suited for use in small control rooms for music production, video post-production and broadcast production – a great fit for the modest budgets that many facilities need to work with.

The ADAM Audio T10S subwoofer is the perfect match to complement the T7V to extend the capabilities of monitoring in the bottom end.

Features

U-ART 1.9” Accelerated Ribbon Tweeter

Allows longer operation with fewer signs of fatigue
Their breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)
The air velocity ratio of 4:1 during the sound generation by folded U-ART membrane

Direct, fast response in the high-range even with complex transients
HPS waveguide from the S Series

Makes dispersion more consistent and imaging more stable over a wider area
Reduction of early reflections on the surfaces of, e.g. mixing consoles, desks, etc.
Lightweight polypropylene construction of the woofer

Excellent transient response even at high sound levels without breakup of the diaphragm
Vertical 2-way system with 7” woofer

High resolution of the stereo image
Spacious rear-firing bass reflex port

Bass reproduction with very low compression
Linear frequency response of 39 Hz to 25 kHz

Unbiased reproduction in a wide frequency band
Maximum peak sound pressure per pair in 1 m ≥ 110 dB

Powerful, compression-free sound reproduction even at very high sound levels
DSP-powered crossover design

Smooth frequency response without interferences between the drivers in the critical mid-range
Simple room acoustic adjustments via high- and low-shelf filters

Allows optimal adaptation to acoustically difficult listening environments or individual preferences
Analog inputs over XLR and RCA

Optimized for balanced and unbalanced line signals
Acoustically optimized cabinet geometry

Reduction of unwanted reflections on the cabinets
Compact cabinet dimensions

Fits every desktop
2 years warranty with optional extension to 3 years with the registration of the product

Full repair service if required for 5 years

Specifications:

Woofer

Number: 1
Basket Ø: 7” (178 mm)
Cone Material: Polypropylene

Tweeter

Number: 1
Type: U-ART
Diaphragm Area: 4 inch² (2420 mm²)
Equiv. Diaphragm Ø: 1.9” (48 mm)
Velocity Transform Ratio: 4:1
Diaphragm Weight: 0.17 g
Waveguide: HPS

Built-In Amplifiers

Number: 2
Woofer: 1
Type: PWM
Amp. Power RMS: 50 W
Tweeter: 1
Type: PWM
Amp. Power RMS: 20 W
Input Sensitivity: Switchable +4 dBu / -10 dBV
Gain: Yes
High-Shelf: - 2 dB, 0 dB, +2 dB
Low-Shelf: - 2 dB, 0 dB, +2 dB

Input Connectors

Analog: XLR, RCA
Input Impedance: 10 kOhm / 20 kOhm

General Data

Panel: Rear
Frequency Response: 39 Hz - 25 kHz
THD > 80 Hz: 0.5 %
Max. SPL per pair at 1 m: ≥110 dB
Crossover Frequency: 2.6 kHz
Max. Power Consumption: 132 W
Weight: 15.7 lbs (7.1 kg)
Height x Width x Depth 13.7" x 8.3" x 11.5” ( 347 mm x 210 mm x 293 mm)
Warranty: 5 years (2 years warranty plus 3 years optional with product registration)
Delivery Contents: Power cord, Quick Start Guide

Package includes:

ADAM Audio T7V Nearfield studio monitor x1
Power cord x1

5 YEARS WARRANTY

Please register your product in the MyADAM user area after your purchase (the date on the purchase receipt applies) to receive an extended warranty totaling five years from the date of your purchase.

The regulations in your region relevant to product warranties apply. When you buy an ADAM Audio product, you receive the standard warranty period of two years. On registering your product in the MyADAM customer area of our website, the warranty is extended by three years to a total of five years. Should warranty extensions be illegal in your region, we cannot extend the warranty period.

WARRANTY TERMS:

https://www.adam-audio.com/en/warranty-terms/
ADAM AUDIO PRODUCT REGISTRATION:

https://www.adam-audio.com/en/my-adam/
How to extend your warranty up to 5 years