ADAM Audio - H200

Artnr: IDS0129090
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

Closed back, cirumaural headphone with detachable cable
40 mm PEEK Performance drivers
Impedance: 32 Ohm
Frequency Response @ -3 dB: 2 Hz -23.5 kHz
Max. SPL: 112.5 dB (@1khz + 0.04% distortion)

Never leave the sweet spot with the H200 Closed-Back Headphones from Adam Professional Audio. These versatile headphones are ideal for studio work and general high-fidelity listening, and sport specialized 40mm PEEK drivers for a smooth and balanced frequency response between 2 Hz and 23.5 kHz.
Both the headband and memory foam earpads are comfortable and fully replaceable. The H200 utilizes a 10' detachable cable, which can be plugged into either the left or right ear. This provides flexibility for adapting to different studio configurations. The 32-ohm impedance allows a wide range of devices to fully drive the H200s, including smartphones and laptops. The over-ear, closed-back design has been tuned to provide excellent passive isolation and elimination of unwanted resonant frequencies. With the free ADAM Audio Headphone Utility plug-in, you can optimize your H200s and unlock spatial audio. The H200s include a 1/4" screw-on plug adapter and a soft carry case.
 
PEEK Performance Drivers
The H200 feature a 40mm Polyether Ether Ketone driver (PEEK) that offers a smooth and balanced frequency response of 2 Hz to 23.5 kHz, plentiful SPL, and low distortion. It is combined with a lightweight neodymium magnet system for crystal-clear sound.
 
Faux Leather and Soft Cloth Earpads
The H200 come with an easy-to-clean faux leather earpad as standard. A soft cloth option is available as a separate accessory. Both options feature memory foam to ensure a comfortable fit, dampen internal resonances, and provide excellent isolation for recording or when working in noisy environments. Differences in frequency response due to the different acoustic properties of the available earpads can be compensated for in the DAW plug-in.
 
Anodized Aluminum Yoke, Durable Headband
Chosen for their strength, comfort, and durability, the headband components offer a firm but not excessive clamping force, and the padding is easy to keep clean and replaceable if damaged. The result is a good over-ear seal that controls unwanted resonances especially in the problematic 70 to 150 Hz frequency band.
 
Dual-Sided Connectivity
The audio cable can be attached to the H200 on either the left or right side using the carefully angled and concealed 2.5mm input jack with a locking collar mechanism. Unlike bayonet or screw-on mechanisms, the collar mechanism will release when under significant pressure to prevent damage to the cable or headphone. This facilitates a more efficient connection to source equipment and allows damaged cables to be easily replaced.
 
Detachable and Durable Enameled Cable
The provided detachable audio cable is 3 m in length and was chosen for its durability, flexibility, and low mechanical noise. It terminates with a 3.5mm connection and a 1/4" adapter is also included. A shorter 1.2 m cable and coiled 3 m cable are also available as separate accessories.
 
ADAM Audio Headphone Utility Plug-In
The included ADAM Audio Headphone Utility is designed for the optimization of the H200 headphones and can be downloaded free of charge upon product registration. While the H200 sound great straight out of the box, source equipment impedance or varying earpad materials have an influence over perceived sound quality.Furthermore, traditional headphones have a restricted stereo image when compared to loudspeakers due to their inherent design. The Headphone Utility is designed to sit on the master channel of your DAW and offers a range of optimization tools as well as a specialization feature that offers a more natural stereo image.

Features
For Studio Use and General Listening
40mm Dynamic Polyether Ketone Drivers
Comfortable Memory Foam Earpads
Anodized Aluminum Yoke
Durable Headband with Replaceable Pad
Detachable Cable, Left or Right Side
Balanced Response from 2 Hz to 23.5 kHz
32 Ohms for Wide Compatibility
Spatialization with Free DAW Plug-In
Includes 1/4" Adapter and Carry Case

Inside the box
Adam Professional Audio H200 Over-Ear Closed-Back Headphones
Straight 3.5mm Headphone Cable (3 m)
3.5mm to 1/4" TRS Screw-On Plug Adapter
Soft Carry Case