ART - Digital MPA II

Artnr: IDS0015380
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

The ART Digital MPA-II - delivers all of the same great features of the ProMPA with the added versatility of digital output.

Like the ProMPA-II, each input circuit has 48v phantom power and features variable input impedance which can radically vary the overall performance of any high quality dynamic or ribbon microphone. The Digital MPA-II can be configured for dual mono or stereo operation with selectable mid/side mic support, summing the adjacent channel, to decode left/right signals.

The input section of the Digital MPA-II operates at either a low or high plate voltage applied to the two integrated hand-selected 12AX7 tubes for wider variation of preamp tone and performance. Large back-lit analog VU output meters display output levels while multi-colored LED arrays, with average or peak hold, show tube gain and digital output levels.

In addition to XLR and 1/4" analog outputs, the Digital MPA-II features a high quality A to D converter which offers digital connectivity on S/PDIF, ADAT, or AES/EBU outputs. A rotary control on the front panel allows selection of format and sample rates from 44.1 to 192 KHz and 16 bit dithering. There is also a push button for, and two wordclock jacks, allowing loop-through.

•Variable Input Impedance For Flexible Microphone Voicing (150 Ohms To 2400 Ohms)
•Selectable Plate Voltage
•Large VU Meters
•Backlit Function Switches
•Discrete Class-A Input Microphone Preamplifier
•Low Noise at Lower Gain Settings
•Extremely Low Total Harmonic Distortion (THD)
•Wide Frequency Response
•Additional Front Mounted Instrument Input Jack
•Supports Mid/Side Miking Technique
•Operates at +4dbm/-10dbv Output
•Selectable Stereo/Dual Operation of Output Controls
•Automatic Instrument Input Selection
•24-204KHz External sample rate
•44.1K, 48K, 88.2K, 96K, 176.4K, 192K Internal sample rates
•24/16 bit switchable dithering
•Wide dynamic range A/D
•Rotary Encoder for quick selection of sample rate
•Separate analog and digital output level controls
•Digital Level LED meters display both Average and Peak level
•ADAT optical I/O
•Sync to incoming ADAT data rate
•Switch selectable optical output (S/PDIF or ADAT)
•AES/EBU and S/PDIF outputs
•Two wordclock jacks allowing loop through