ART - TransX

Artnr: IDS0082154
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

The TransX two channel microphone preamplifier features a new low noise discrete transformer coupled high performance preamplification circuit. Building upon the quality and success of great sounding products like the Pro MPA II and the Pro VLA II, ART engineers set out to develop the next generation of professional microphone preamplifier to compliment our tube-based preamps. The TransX sets a new standard for quality and value. Professional features and spectacular tone are what make the TransX a world-class microphone preamplifier.
Key Features
Input Transformer blocks R.F. and other noise
 Custom Output Transformer reduces ground noise and maintains level for Balance/Unbalanced connections
 Low noise, low THD discrete audio path
 High impedance direct coupled low noise Instrument input
 Variable input impedance on the XLR input
 Rotary switches allow for reliable, repeatable results
 Gain trim function for precise adjustment of gain
 20dB pad allows high level XLR input signals
 Wide range peak sensitive LED meter
 Phase reverse switch
 Auto muting on outputs
 Ground lift function on each channel’s outputs
 Universal External supply reduces noise and lowers power consumption
 Rugged, reliable steel chassis shields the preamp from external noise
Specifications
Frequency Response
10-50kHz + 1dB
Total Harmonic Distortion
<0.009% @1kHz, +4dBu out
CMRR
90dB @60Hz
Equivalent Input Noise
Mic (@max gain) -128dBu “C” wtd.
Inst. (@ max gain) -125dBu “C” wtd.
Input Impedance
Mic 150 to 1k Ohm variable
Instrument 1M Ohm
Maximum Gain
Mic in to output (bal.) +68dB
Inst. IN to Main output (bal.) +59dB
Maximum Input Level
XLR +24dBu
Instrument +15dBu
Maximum Output Level
+24dBu
Output Impedance
100 Ohms
Low Cut Filter
Slope 6dB/Oct.
Range 10Hz to 200 Hz
Step size 1/3 Oct.
Phantom Power
Switch selectable, +48V DC, filtered, current limited
Chassis Type
Chassis Steel, Painted finish
Power Supply
Input requirements USA – 85 to 250 VAC/ 50-60 Hz
Export units configured for country of destination.
Output requirements 48 V dc, 10 Watts Max
Dimensions
1.75″H x 19″W x 9.5″D (44m x 483mm x 241mm)
Weight
13.2 lbs. (6.0 kg)
Notes
With the locking power supply plug connected, the depth increases to 11.6″ (295mm) total 

0 dBu = 0.775 VRMS

ART maintains a policy of constant product improvement. ART reserves the right to make changes in design, or make additions to, or improvements upon, this product without any obligation to install same on products previously manufactured. Therefore, specifications are subject to change without notice.