Audac - APM01
Artnr: IDS0002925
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »
Teave:
Digital microphone for use in paging and evacuation systems to control 1 zone only. The APM01 paging console is equipped with a condenser microphone with cardioid polar characteristic. By means of a built-in compressor-limiter, the output level of the microphone signal is constantly maintained. Furthermore, there’s an indication on the front panel which shows the value of the output level, giving the speaker confirmation of a clearly reproduced message. There’s also an indication which shows whether the data line of the appliance is busy. By means of the free software, the APM01 priority setting can be configured, in case more than 1 console is used. Because all consoles in the same system are using the same digital bus connection, the priority status will see to it that the console with the highest priority is always heard in case more than 1 console is operated at the same time. The standard used data bus is RS485, but by means of an optional interface, other data bus standards can also be used. The appliance is connected by a single connector of the RJ45 type. The APM01 paging console must always be combined with the ARU (AVD) intelligent relay units. These units communicate with the APM04 over the data bus. Based on the number of zones, the appropriate relay unit must be used.
Technical Specifications :
Paging zones 1
Power supply 24 Volts DC
Input mains power 4.8 Watt
Standard data bus RS485
Polar pattern cardioid
Output level programmable
Reproduction frequency range 150 - 12.000 Hz
Colour Grey RAL7016
Weight 1.1 kg
Dimensions 120 x 55 x 190 mm
Height 45 mm
Length microphone + gooseneck 300 mm