DPA - 4011FGS

Artnr: IDS0048094
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

A complete cardioid microphone floor stand solution in the modular d:dicate™ Microphone Series offering a high-quality stage voice or instrument mic.

The floor stand has an elegant and exclusive design with a black, non-reflective surface specifically made to handle the, from time to time, rough life in TV-studios, OB-vans and onstage in theaters and concert halls. The Floor Base has an integrated shock mounting solution. The thread screw holds the Stand Extension and Active Boom Pole. This unique design allows for a long stage microphone boom pole that does not swing, but rapidly stabilizes itself after being positioned.

This floor stand solution comes in two lengths:

d:dicate™ 4011FJS Supercardioid Microphone, Single 77 cm (30 in) Boom, Floor Stand

d:dicate™ 4011FGS Supercardioid Microphone, Single 122 cm (48 in) Boom, Floor Stand

The microphone capsule

The principal appeal of the MMC4011 Cardioid Microphone Capsule is its directional quality and attention to detail. This mic makes everything sounds like the original. The first-order cardioid pickup pattern provides superb separation between sound sources.

It is equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments and vocals as it is for spot-miking symphonies. It can handle incredibly high sound levels and even includes a 20 dB pad switch in the center of the XLR connector to attenuate the output of the microphone.

A flat on-axis frequency response and excellent phase response deliver a totally faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pickup pattern.

A truly flexible range

This mic is part of the flexible d:dicate™ Microphone Series. At any time, and with no tools needed, it is possible to transform the d:dicate™ 4011F Supercardioid Microphone into a new configuration. You can combine it with another d:dicate™ or d:facto™ Microphone Capsule or Preamplifier.

Features

The product offers the following features

Great for high sound levels

Accurate sound

Colorless sound

Modular flexibility

Directional pattern

Cardioid

Principle of operation

Pressure gradient

Cartridge type

Pre-polarized condenser

Frequency range

20 Hz - 20 kHz

Frequency range, ±2 dB, at 30 cm (11.8 in)

40 Hz - 20 kHz

Sensitivity, nominal, ±2 dB at 1 kHz

10 mV/Pa; -40 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))

Equivalent noise level, ITU-R BS.468-4

Typ. 25 dB

S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)

Typ. 76 dB(A)

Total harmonic distortion (THD)

< 1% up to 139 dB SPL peak

Dynamic range

Typ. 121 dB

Max. SPL, peak before clipping

144 dB

Output impedance

100 Ω

Minimum load impedance

2 kΩ

Cable drive capability

100 m (328 ft)

Output balance principle

Impedance balancing

Common mode rejection ratio (CMRR)

> 40 dB

Power supply (for full performance)

48 V Phantom power (± 4 V)

Current consumption

3.5 mA

Connector

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color

Matte black

Microphone diameter

19 mm (0.75 in)

Capsule diameter

19 mm (0.75 in)

Microphone length

Capsule: 23 mm (0.9 in), Boom poles: 77 cm (30 in), 122 cm (48 in)

Maximum output voltage, RMS

2.2 V

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90%

Matching tolerance (frequency response and sensitivity)

±1 dB

Phase deviation for kit

< 10°