Eurolite - LED KLS Laser Bar PRO FX Light Set

Artnr: IDS0097618
Tarneaeg: 10-30 tööpäeva.

Teave:

4-in-1 DMX light effect bar with laser, 2 rotating LED derbies, 2 LED spots and strobe LEDs in white and UV
Enhanced version with very high brightness and additional UV LEDs
Laser class 2M: does not require additional protective measures or appointment of a laser safety officer
Ultra-light ideally suited for mobile use
Crossbar with integrated DMX control unit and stand sleeve
Comes pre-assembled with practical transport bag
Convenient control via wireless foot switch and IR remote control
2 laser diodes project hundreds of red and green laser beams
2 rotating derbies for mirror ball effects with 6 bright LEDs (red, green and blue) each
2 spots with 6 bright 3in1 LEDs (red, green and blue) each
Strobe effect with 4 bright 2in1 LEDs (white and UV)
39 built-in auto and music show programs that include all 4 effect units
Addressing and setting via control panel with 4-digit LED display
Swivel mounting brackets for truss mounting
When fog is used, this effect becomes especially attractive
IEC terminals for power linking up to 8 units
Switch-mode power supply for operation between 100 and 240 volts
LED: Spot 2 x separate controlling each with 4 x high-power 2 W 2in1 BCL CW/UV (homogenous color mix)
LED: Multi beam effect 2 x separate controlling each with 6 x high-power 2 W RGB
LED: Strobe effect 6 x separate controlling with 6 x high-power 6 W 3in1 TCL RGB (homogenous color mix)
Can be operated in 3; 5; 10; 28 CH mode
The device is cooled by cooling fan
Controling by Sound to light via Microphone; Wireless footswitch; IR remote control; Stand-alone; DMX; Master/slave function
Is in EASY SHOW already preprogrammed
Effect: Multi beam effect; Strobe effect; laser
TECHNICAL SPECIFICATIONS
Power supply: 100-240 V AC, 50/60 Hz
Power consumption: 150 W
IP classification: IP20
Power connection: Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)
Length of the cable: 3 m
Power output: 1 x IEC connector (F) mounting version
Fuse: 5 x 20 mm, T 3.15 A
LED: Spot 4 x high-power 2 W 2in1 BCL CW/UV (homogenous color mix)
Multi beam effect 6 x high-power 2 W RGB
Strobe effect 6 x high-power 6 W 3in1 TCL RGB (homogenous color mix)
Flash rate: 0 - 30 Hz
DMX channels: 3; 5; 10; 28
DMX input: 1 x 3-pin XLR (M) mounting version
DMX output: 1 x 3-pin XLR (F) mounting version
Cable construction: 3 x 1.0 mm² H05VV-F
Cooling: Cooling fan
Control: Sound to light via Microphone
Wireless footswitch
IR remote control
Stand-alone
DMX
Master/slave function
Beam angle: 13°
Beam angle (1/2 peak): 13°
Housing color: Black
Width: 132 cm
Height: 32 cm
Depth: 14.5 cm
Weight: 10.75 kg
laser
Laser color: 2in1 BCL RG
Laser class: Class 2M
Laser module: R red 100 mW 650nm
G green 30 mW 532nm
Foot control
Battery: 1 x 9.0 V E block 6F22 zinc carbon included
Remote control @@artlu
1 x Button cell 3.0 V CR2025 lithium manganese built-in