HK Audio - CADIS CAD 208 Top

Artnr: IDS0018566
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

Power-handling nominal (RMS) 250 W RMS, 500 W Prog.
Frequency response +/- 3 dB - 75/ 100 Hz – 18 kHz (depending on controller & length)
Nominal impedance 8 ohms
Sensitivity 1W 95 dB Full space 101 dB Half Space
Connections - 2 x Speakon NL 4 (standard) - External terminal (optional) - PG gland, internal terminal (optional)
Speaker 2 x 8“ speaker
HF Driver 2 x 1“
X-Over 2 ? way passive
Subsonic filter Crossover Controller
Crossover frequency 1,8 KHz, 12 dB/ octave
Rigging points Integrated 3-point
Enclosure Polyamide
Grille Metal
Finish schwarz oder wei? optional weitere RAL Farben erh?ltlich
Dimensions (WxHxD) 57,8 cm x 23,8 cm x 37,3 cm
Weight 17.5 kg (35.35 lbs) passive, 16.4 kg tri-amped (without internal passive Xover)
This professional 2 1/2-way speaker system serves to set up vertical arrays that project a wide wave-front across the entire audience area. Two 8“ loudspeakers are mounted in a precision-tuned polyamide housing. Two 1“ HF drivers are coupled to two CD horns with 100° horizontal and 15° vertical directivity. The tough polyamide housing is weather- and UVresistant. It comes in black or white, though other RAL colors are available on demand. The fully integrated rigging hardware is adjustable from 0° to 15° in 1.5° steps. The front grille is made of steel.

The HK Audio FirNet Controller or HK AUDIO DSM 2060 Controller paired with VX2400 power amps serve to drive these speakers. Frequency response ranges from 75 Hz to 18 kHz (+/-3 dB), with 95 dB axial sensitivity (one unit) @ 1W/1 m under full-space conditions and 130 dB maximum SPL at 10% THD. Power handling is 250 watts RMS per unit; nominal impedance is 8 ohms.

Connectors:
Optionally either two NL4s for the passive or NL8s for the triamped version, Barrierstrips, or PG glands with terminals inside

Dimensions (W x H x D):
57.8 x 23.8 x 37.3 cm

Weight:
17.5 kg with passive x-over, 16.4 kg without internal x-over

Accessories:
Rigging/stacking frame, connector frame for flying mid/high units in an array with subwoofers on top, wall mount, ceiling mount

Type:
HK AUDIO CADIS CAD 208 mid/high unit