KHDK Electronics - No. 2

Artnr: IDS0116145
Tarneaeg: Kaup on ajutiselt otsas. Kontakteeruge meiega tarneaja prognoosiks. »

Teave:

Much more than a precision clean boost!

Powered by KHDK's original circuit, No. 2 is KHDK’s Clean Boost pedal with a dynamic responsiveness similar to a tube amp, compression-free.No.2 utilizes KHDK's original true bypass circuit using our special blend of solid state and mosfet technology.

Like all KHDK pedals, No.2 is proudly crafted and quality-tested in Kentucky, USA.

 Controls

GAIN controls the unity gain of the circuit.
VOLUME controls the overall output volume of the No. 2.
HI/LO switch is tied directly into the gain. The lo setting offers a warm, tube-like boost. The hi setting adds saturation, compression and a powerful mid boost.
BASS controls the bass and lower mid-frequency gain. The bass is tied into the gain, making it a secondary gain control enhancing lows. For boosting an overdriven tube amp, it is recommended to lower the Bass control setting for a tighter bass response. For single note soloing, turn the Bass control clockwise.
TREBLE control is a passive low-pass filter, cutting high end and offering a wide frequency range. The setting depends on your amplifier; we recommend cutting the treble on brighter amps to achieve a warm tone.
FOOTSWITCH engages your No. 2 to “on” or True bypass mode.
Power

The KHDK No. 2 Clean Boost is powered by a single 9V battery. You can access the battery connection
by unscrewing the bottom plate of the pedal enclosure. Alternatively, plug in an external 9V DC (center
negative) power supply.

Specifications

    Bypass mode: True Bypass
    Dimensions: 120 x 65 x 40 mm deep (Width x Depth x Height)
    Input Connector: Type Standard ¼” jack – mono/TS
    Output Connector: Type Standard ¼” jack – mono/TS
    Power Input: Standard 9V Battery or 9V DC (center negative) power supply.