Valhalla - Speaker Feet Type 15

Artnr: IDS0025645
Tarneaeg: 2-7 tööpäeva.

Teave:

VT Feet Type 15 is ideal for small volume but medium to heavy weight speakers and monitor units. These dampning feet effectively isolate the speakers from the shelf, stand or floor they are placed on. 

VT Feet Type 15 allows you to hear the sound directly from your sound system without the vibrations generated by the speaker cabinet disturbing the sound quality through the material the speaker is resting on. 

Easy to use. Place 4 pieces of VT Feet Type 15 under each loudspeaker as close to the outer corners of the bottom. Remove the lining to expose the mild adhesive that attaches the VT Feet to the speaker. Make sure no other parts of the speaker protrude further down than the part of the VT Feet attached to the speaker. The VT Feet can be removed again without damaging the cabinet finish.

Note: Never exceed the maximum allowed weight for the VT Feet. For the VT Feet Type 15 this means the loudspeaker must weigh less than 30 kg.

For medium and heavier weight speakers and equipment
8 pieces suitable for 2 speakers
Dimension: 49 x 49 x 10mm
Maximum load: 7,5 kg per feet / 15 lb per feet
Material: VT AMF
Adhesive: Decoration strength